Top 48 Best Kawasaki Ninja 250s

 

i5 Black Spike Bar Ends for Kawasaki Ninja 250 300 500 650 ZX6 ZX7 ZX9 ZX10 ZX12 ZX14

i5 Black Spike Bar Ends for Kawasaki Ninja 250 300 500 650 ZX6 ZX7 ZX9 ZX10 ZX12 ZX14

i5 Black Spike Bar Ends for Kawasaki Ninja 250 300 500 650 ZX6 ZX7 ZX9 ZX10 ZX12 ZX14 - To fit kawasaki ninja 250 1987-2012, ninja 300 2013-2016, ninja 500 1994-2009, ninja 600/zx600/zx6/636/zzr600/zx6r/zx6rr 1987-2016, zx750/zx7/zx7r 1989-2003, zx900/zx9/zx9r 1994-2003, ninja zx10r 2006-2007 & 2011-2016, zx11 1990-2001, zx12r 2000-2005, zx14 2006-2016. High quality billet aluminum with black finish. Brand new pair of black spike bar ends. During checkout your quantity will show as 1, this represents one pair.

 

NGK Resistor Sparkplug CR8E for Kawasaki Ninja 250 EX250F 2008-2012

NGK Resistor Sparkplug CR8E for Kawasaki Ninja 250 EX250F 2008-2012

NGK Resistor Sparkplug CR8E for Kawasaki Ninja 250 EX250F 2008-2012 - Consistent performance. Plug of choice in millions of vehicles. Tolerances are so close that the margin for error is near zero. Ngk is the world’s largest supplier of oem spark plugs. Triple-gasket sealing process.

 

i5 New Clutch Lever for Kawasaki Ninja 250 300 2008-2014

i5 New Clutch Lever for Kawasaki Ninja 250 300 2008-2014

i5 New Clutch Lever for Kawasaki Ninja 250 300 2008-2014 - To fit kawasaki ninja 250 2008-2012, ninja 300 2013-2014. Brand new clutch lever. High quality aluminum with black finish.

 

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016 - Note no install instructions if the product has any problem, please feel free to contact us thank you so much. Fit for kawasaki ninja 250 / ninja 300 2013 2014 2015 2016. Material billet aluminum. Note do not come with a turn signal light but you could use the stock turn signals with this fender eliminator. Very important doesnt fit ninja 250r (our customer leave the review).

 

Swingarm Spools 10mm For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon

Swingarm Spools 10mm For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon

Swingarm Spools 10mm For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon - Instructions no instruction,material high quality billet aluminum,,,,,,,,,. They can also be used with a lift stand to lift the rear wheel off of the ground for changing your tire or oiling your chain. Thread 10mm. Color the same with pictures show. These swingarm spools are designed to protect your swingarm & axle nut in the event of a crash.

 

No Cut Frame Slider For 2008 2009 2010-2013 Kawasaki Ninja 250 250R Ex250 Carbon

No Cut Frame Slider For 2008 2009 2010-2013 Kawasaki Ninja 250 250R Ex250 Carbon

No Cut Frame Slider For 2008 2009 2010-2013 Kawasaki Ninja 250 250R Ex250 Carbon - Fitment 2008-2013 kawasaki ninja 250 / 250r / ex250. You want them to stay attached but get beat up and take the energy. Attributes high quality and light weight frame sliders (left & right sides) frame sliders help to protect the frame, engine cases and bodywork/fairings to minimize the cost of repair professional installation is recommended specifics quantity 1 pair instructions not included condition brand new, never used color same as picture show material delrin quick bullet points about sliders they are not designed to protect plastics, clipons, or rearsets, even though they might help sometimes. You do not want a slider to stick out too far or it will help flip your bike in a crash by snagging on the ground, curb or anything else. If the bolt on a frame slider bends that’s a good thing as the only other option is to put the energy on the frame or mounting point. Also if it didn’t bend it might have flip the bike by snagging something. Frame sliders are the same way. A mangled frame slider, but still on the bike, did it’s job. Better the bolt bends. If your slider shatters, grinds off or bends then it did it’s job. No cut frame sliders aren’t a direct bolt on like cut sliders as they often have a bracket. When f1 cars hit the side of a track they explode as they don’t want the drive to absorb the energy. You want delrin or plastic to touch down when you crash as they will grind off and not catch on anything and if hit hard enough or direct enough they will shatter. You don’t want it solid after a crash or it didn’t absorb any energy but merely transfered it on to what you bolted it to.

 

Fuel Gas Cap Cover Lock Keys for 1988-2007 Kawasaki Ninja 250 EX250 ZX6R Ninja 500

Fuel Gas Cap Cover Lock Keys for 1988-2007 Kawasaki Ninja 250 EX250 ZX6R Ninja 500

Fuel Gas Cap Cover Lock Keys for 1988-2007 Kawasaki Ninja 250 EX250 ZX6R Ninja 500 - Compatibilitykawasaki1995,1997-1999 zx-6rzx-6rf1-3 (all years)zx-6rg1-3 (all years)zx-7r (all years)1984 m146 zx-9r1994-1999 m146 zx-9r1994-1997 zx-9rb1998-1999 zx-9rckr250/kr250a/kr250s (all years)zxr-250 (all years)zxr-400 (1993, present)1993-2001 zxr-750 zx-6e1986-2006 zg1000 concours1995-1997 zx-11zrx1100 (all years)zx600 zzr600zzr1100 zx1100zr400-d1 ex400-b1 ex-4 xanthus1988-2007 ninja 250/250r1988-2007 ninja ex250/gpz250/gpx250ninja 500/500r/ex500/gpz500/gpz500s (all years)gpz400 gpz250 gpz750 gpz900 gpz1000 gpz1100.

 

Motorcycle Slip on Exhaust system With Muffler Fit For Kawasaki ninja 250 ninja 300 2008-2017

Motorcycle Slip on Exhaust system With Muffler Fit For Kawasaki ninja 250 ninja 300 2008-2017

Motorcycle Slip on Exhaust system With Muffler Fit For Kawasaki ninja 250 ninja 300 2008-2017 - The ninja250 slip on exhaust is our number 1 selling exhaust system for the kawasaki ninja250 because it looks great, sounds great ,price is cheap and easy to install made of 304 stainless steel .

 

TJMOTO No Drill Frame Sliders For 2008-2012 Kawasaki Ninja 250 250R EX250 BLK

TJMOTO No Drill Frame Sliders For 2008-2012 Kawasaki Ninja 250 250R EX250 BLK

TJMOTO No Drill Frame Sliders For 2008-2012 Kawasaki Ninja 250 250R EX250 BLK - Aftermarket 100% brand new usa stock only sold and quality guaranteed by tjmoto. Fitment 2008-2012 kawasaki ninja 250 / 250r / ex250. High quality and light weight frame sliders (left & right sides). Professional installation is recommended. Even in a low speed fall, these frame sliders help to protect the frame, engine cases and bodywork/fairings to minimize the cost of repair.

 

Alpha Rider Universial 10x Windshield Bolts 5MM Windscreen Mounting Screws for kawasaki Ninja 250 1986-1987 EX250E  Ninja 250R 1988-2007 EX250F  Ninja 250R 2008-2012 EX250J Black

Alpha Rider Universial 10x Windshield Bolts 5MM Windscreen Mounting Screws for kawasaki Ninja 250 1986-1987 EX250E | Ninja 250R 1988-2007 EX250F | Ninja 250R 2008-2012 EX250J Black

Alpha Rider Universial 10x Windshield Bolts 5MM Windscreen Mounting Screws for kawasaki Ninja 250 1986-1987 EX250E | Ninja 250R 1988-2007 EX250F | Ninja 250R 2008-2012 EX250J Black - Universal fit for motorcycle using m5 5mm bolts. Pls make sure the informations (year model submodel) of your motorcycle before you take order pls feel free to contact us if you have any other questions thx. Pacakge a set of 10 bolts with wellnuts and washers | cnc anodized aluminum bolts x 10 | rubber wellnuts x 10 | plastic washers x 10 | hex key wrench x 1. Material anodized aluminum | bolt size 5mm x 16mm. Fitments for kawasaki ninja 250 1986-1987 ex250e | ninja 250r 1988-2007 ex250f | ninja 250r 2008-2012 ex250j.

 

Areyourshop Windshield WindScreen Double Bubble Kawasaki Ninja 250 250R EX250 08-12 Iridium

Areyourshop Windshield WindScreen Double Bubble Kawasaki Ninja 250 250R EX250 08-12 Iridium

Areyourshop Windshield WindScreen Double Bubble Kawasaki Ninja 250 250R EX250 08-12 Iridium - Material high quality abs plastic installation highly recommended installed by professional please visit my store for windshield screw. Brand new windshield fit for kawasaki ninja 250 250r ex250 2008-2012 pieces 1 pieces color what you see is what you get condition brand new , the holes are pre drilled, aftermarket parts, for modify use.

 

i5 Carbon Sportbike Mirrors to fit Kawasaki Ninja 250 1989-2007

i5 Carbon Sportbike Mirrors to fit Kawasaki Ninja 250 1989-2007.

i5 Carbon Sportbike Mirrors to fit Kawasaki Ninja 250 1989-2007. - To fit kawasaki ninja 250 1989-2007 (not 2008+). During checkout your quantity will show as 1, this represents one pair. No modification is required, these mirrors bolt straight into your stock mounting points installation instructions and mounting bolts are included. Brand new pair of carbon sportbike mirrors. These mirrors are similar in size and provide a similar amount of rear-view as your stock mirrors, but the one-piece metal stem and rounded shape give your ninja 250 a much more modern look than the stock mirrors that date back almost 20 years.

 

PZRacing Geartronic Zero GT310-K3 Plug and Play Digital Gear Indicator fits Kawasaki Ninja 250 300 650 750 Z800 Z1000 SX R Versys

PZRacing Geartronic Zero GT310-K3 Plug and Play Digital Gear Indicator fits Kawasaki Ninja 250 300 650 750 Z800 Z1000 SX R Versys

PZRacing Geartronic Zero GT310-K3 Plug and Play Digital Gear Indicator fits Kawasaki Ninja 250 300 650 750 Z800 Z1000 SX R Versys - Highest quality and fastest gear indicator on the market, with 200ms gear indicating response time. Made in italy 100% weatherproof and 2-year no hassle replacement warranty. 100% plug and play unit, no splicing or wiring work needed complete with simple installation instructions. Used by many top level racers in various european championships make the right choice and get the best for your kawasaki. Unlike others, these feature a full lcd display with 6 different backlight colors you can choose from the setup menu.

 

LED Motorcycle Integrated Tail Light Smoke Lens Motorbike Rear Lamp Integrated Brake Stop Turn Signal Light For Kawasaki Ninja 250 300 2012-2013

LED Motorcycle Integrated Tail Light Smoke Lens Motorbike Rear Lamp Integrated Brake Stop Turn Signal Light For Kawasaki Ninja 250 300 2012-2013

LED Motorcycle Integrated Tail Light Smoke Lens Motorbike Rear Lamp Integrated Brake Stop Turn Signal Light For Kawasaki Ninja 250 300 2012-2013 - Condition 100% brand new color black case with smoke lens material high quality abs plastic light type led voltage 12v feature tail light,brake light,stop light,turn signal light are all integrated in one(turning light is amber,brake light is red&blue) noted no installation instructions,easy to install packing include1 x motorcycle led integrated light fit for kawasaki ninja250 2012-2013 kawasaki ninja300 2012-2013.

 

Genuine Kawasaki Ninja 250 250R Brake Pedal OEM Part  43001-0100 EX250 2008-2012 Foot Lever

Genuine Kawasaki Ninja 250 250R Brake Pedal OEM Part # 43001-0100 EX250 2008-2012 Foot Lever

Genuine Kawasaki Ninja 250 250R Brake Pedal OEM Part # 43001-0100 EX250 2008-2012 Foot Lever - Fits2008 ninja 250r2008 ninja 250r2009 ninja 250r2009 ninja 250r2009 ninja 250r2009 ninja 250r2010 ninja 250r2010 ninja 250r2010 ninja 250r2010 ninja 250r2011 ninja 250r2011 ninja 250r2011 ninja 250r2011 ninja 250r2012 ninja 250r2012 ninja 250r2012 ninja 250r2012 ninja 250r.

 

SpeedTactics FE-KAW250-0809-LED-SIG - Kawasaki Ninja 250 Fender Eliminator Kit Complete with LED turn signals and license plate lights

SpeedTactics FE-KAW250-0809-LED-SIG – Kawasaki Ninja 250 Fender Eliminator Kit Complete with LED turn signals and license plate lights.

SpeedTactics FE-KAW250-0809-LED-SIG – Kawasaki Ninja 250 Fender Eliminator Kit Complete with LED turn signals and license plate lights. - Kit includes fender eliminator bracket, and all necessary hardware is included with kit. This fender eliminator kit is specifically designed to work with the kawasaki ninja 250 2007-2012 model years. Machined from aircraft grade aluminum and anodized to a satin black finish and laser etched. Kit includes fender eliminator bracket, and all signal brackets, ultra bright led turn signals and plate lights. Detailed step by step instructions included in all kits bracket is made in good old usa.

 

Areyourshop Windshield WindScreen Double Bubble For Kawasaki Ninja 250 250R EX250 2008-12 Black

Areyourshop Windshield WindScreen Double Bubble For Kawasaki Ninja 250 250R EX250 2008-12 Black

Areyourshop Windshield WindScreen Double Bubble For Kawasaki Ninja 250 250R EX250 2008-12 Black - Material high quality abs plastic installation highly recommended installed by professional please visit my store for windshield screw. Brand new windshield fit for kawasaki ninja 250 250r ex250 2008-2012 pieces 1 pieces color what you see is what you get condition brand new the holes are pre drilled, aftermarket parts, for modify use.

 

FXCNC Racing Motorcycle Gas Cap Fuel Tank Cap With Key Lock Set Fit For Kawasaki Ninja 250 05-12 Ninja 300 13-14

FXCNC Racing Motorcycle Gas Cap Fuel Tank Cap With Key Lock Set Fit For Kawasaki Ninja 250 05-12 Ninja 300 13-14

FXCNC Racing Motorcycle Gas Cap Fuel Tank Cap With Key Lock Set Fit For Kawasaki Ninja 250 05-12 Ninja 300 13-14 - Rubber gasket design, effectively prevent the gasoline to play. Easy installation multi-purpose compatibility sealed and durable. 100% cnc aluminum 6061, t10 and silver anodization. Package include1xfuel gas tank cap cover. Please check if this product match your motorcycle before buying.

 

Motorcycle Turn Signals For Honda Cbr 600 1000 Rr Kawasaki Ninja 250 500 Zx6 Zx9 Zzr600 Sm

Motorcycle Turn Signals For Honda Cbr 600 1000 Rr Kawasaki Ninja 250 500 Zx6 Zx9 Zzr600 Sm

Motorcycle Turn Signals For Honda Cbr 600 1000 Rr Kawasaki Ninja 250 500 Zx6 Zx9 Zzr600 Sm - Color the same like pictures showfitmenthonda cbr 600 1993-2006 honda  cbr 900 929 954 1000 rr kawasaki ninja 1987-2007 kawasaki ninja 250 500 zx6 zx7 zx9 kawasaki zzr600 2005-2007.

 

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter - Volar motorsport oil filter. Designed for ultimate flow with less pressure drop while trap harmful contaminants. Quantity 1 fitment 1986-2012 kawasaki ex250r ninja. Features a synthetic filter media.

 

Real Carbon Fiber Chrome 3D Sticker Vinyl Decal Emblem Protection Gas Tank Pad For KAWASAKI Ninja 250 300 ALL Series

Real Carbon Fiber Chrome 3D Sticker Vinyl Decal Emblem Protection Gas Tank Pad For KAWASAKI Ninja 250 300 ALL Series

Real Carbon Fiber Chrome 3D Sticker Vinyl Decal Emblem Protection Gas Tank Pad For KAWASAKI Ninja 250 300 ALL Series - Product description this listing is for a set of 1 gas tank pad, made of high quality carbon fiber material. These decals look great on a gas tank, fender, or any smooth surface. Condition 100% brand new color carbon fiber material carbon fiber cover gel comes with adhesive on the back, just peel and stick for kawasaki ninja all models.

 

M-G 330807-1 Clutch Cover Gasket for Kawasaki Ninja 250 250R

M-G 330807-1 Clutch Cover Gasket for Kawasaki Ninja 250 250R

M-G 330807-1 Clutch Cover Gasket for Kawasaki Ninja 250 250R - Clutch cover gasket for kawasaki ninja 250 250r.

 

2008-2012 Kawasaki Ninja 250 250R BLACK GRAFFITI GRAPHICS KIT

2008-2012 Kawasaki Ninja 250 250R BLACK GRAFFITI GRAPHICS KIT

2008-2012 Kawasaki Ninja 250 250R BLACK GRAFFITI GRAPHICS KIT - To fit kawasaki ninja 250r 2008-2012. Complete kit includes high-gloss decals for fairing, fender, gas tank & tail section. Note some sections of your existing paint remain exposed. All our products are brand new. You are bidding on a brand new graphics kit.

 

OKSTNO Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 Zx 6r 10r 12r Zx-14 Zx-rr Zx600

OKSTNO Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 Zx 6r 10r 12r Zx-14 Zx-rr Zx600

OKSTNO Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 Zx 6r 10r 12r Zx-14 Zx-rr Zx600 - Sleek and stylish design. 90 days warrenty period for free replacement or refund and you don’t need to return if you find the product is defective, please contact with us directly. Package included set of two side mirrors built with turn signal (left and right). Fits most motorcycle, sport racing bike models with fairing (need modification for angle adjustment). Lens color smoke.

 

JFG RACING Gas Tank Pad Traction Side Fuel Grips Decal For Kawasaki Ninja 250 300 2008-2016

JFG RACING Gas Tank Pad Traction Side Fuel Grips Decal For Kawasaki Ninja 250 300 2008-2016

JFG RACING Gas Tank Pad Traction Side Fuel Grips Decal For Kawasaki Ninja 250 300 2008-2016 - This pad is very grippy and well constructed. Material made from elastomer rubber with a super strong 3m adhesive. Effectively increase the contact area so that prevent sliding. Fit to kawasaki ninja 250 300 2008-2016. The pad is designed to fit frames and gas tanks and the rider can grip their bike with ease and with less energy.

 

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 Black

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 Black

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 Black - No cut frame sliders aren’t a direct bolt on like cut sliders as they often have a bracket. You want delrin or plastic to touch down when you crash as they will grind off and not catch on anything and if hit hard enough or direct enough they will shatter. You don’t want it solid after a crash or it didn’t absorb any energy but merely transfered it on to what you bolted it to. Frame sliders are the same way. Better the bolt bends. When f1 cars hit the side of a track they explode as they don’t want the drive to absorb the energy. You want them to stay attached but get beat up and take the energy. Attributes high quality and light weight frame sliders (left & right sides) frame sliders help to protect the frame, engine cases and bodywork/fairings to minimize the cost of repair professional installation is recommended specifics quantity 1 pair instructions not included condition brand new, never used color same as picture show material delrin quick bullet points about sliders they are not designed to protect plastics, clipons, or rearsets, even though they might help sometimes. Also if it didn’t bend it might have flip the bike by snagging something. A mangled frame slider, but still on the bike, did it’s job. You do not want a slider to stick out too far or it will help flip your bike in a crash by snagging on the ground, curb or anything else. If your slider shatters, grinds off or bends then it did it’s job. If the bolt on a frame slider bends that’s a good thing as the only other option is to put the energy on the frame or mounting point. Fitment 2008-2013 kawasaki ninja 250 / 250r / ex250.

 

Kawasaki Ninja 250 ZX6 ZX6R ZX600 ZX7 ZX7R ZX750 ZX9 ZX9R Front Foot Pegs Black

Kawasaki Ninja 250 ZX6 ZX6R ZX600 ZX7 ZX7R ZX750 ZX9 ZX9R Front Foot Pegs Black

Kawasaki Ninja 250 ZX6 ZX6R ZX600 ZX7 ZX7R ZX750 ZX9 ZX9R Front Foot Pegs Black - Compatibility kawasaki ninja 250 1988-2007 zx6 zx600 / zx6r 1987-2002 (not for zx6r 1999) zzr600 2003-2007 zx7 zx750 / zx7r 1987-2003 zx9 zx900 / zx9r 1994-2002 zx11 1990-2001 zrx 1100 / zrx 1200 1999-2005 zx12r 2001-2003 zzr1200 2002-2003.

 

Motorbike Spike Bar Ends For Kawasaki Ninja 250 500 Zx600 Zx6 636 Zzr600 Zx6R Zx6Rr Black

Motorbike Spike Bar Ends For Kawasaki Ninja 250 500 Zx600 Zx6 636 Zzr600 Zx6R Zx6Rr Black

Motorbike Spike Bar Ends For Kawasaki Ninja 250 500 Zx600 Zx6 636 Zzr600 Zx6R Zx6Rr Black - These bar ends are designed to protect your bars and grips in the event of a crash. High quality anodized billet aluminum cnc made bar ends. Color same with the pictures,condition 100% brand new,quantity 1 pair (2 pcs). Easy installation screw directly into your existing handlebar insert. Material high quality billet aluminum.

 

G_MTK13_08_K027A Motorcycle Frame Sliders Crash Protector fit for Kawasaki Ninja 250  250R  EX250 2008 2009 2010 2011 2012

G_MTK13_08_K027A Motorcycle Frame Sliders Crash Protector fit for Kawasaki Ninja 250 / 250R / EX250 2008 2009 2010 2011 2012

G_MTK13_08_K027A Motorcycle Frame Sliders Crash Protector fit for Kawasaki Ninja 250 / 250R / EX250 2008 2009 2010 2011 2012 - Frame slider kits are engineered on the race track for precise fitment. Motorsports frame savers are designed to help protect your motorcycle and expensive bodywork in the event of a crash or tip over.

 

HTTMT- Kickstand Foot Side Stand Support For Kawasaki Ninja 250 250R EX250 08-2012 US

HTTMT- Kickstand Foot Side Stand Support For Kawasaki Ninja 250 250R EX250 08-2012 US

HTTMT- Kickstand Foot Side Stand Support For Kawasaki Ninja 250 250R EX250 08-2012 US - Attributes adjustable cnc aluminum kickstand condition 100% brand new aftermarket product material anodized billet aluminum quantity 1 pc colorsame as picture show no installation instruction fitment kawasaki ninja 250 250r ex250 2008-2012.

 

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter - 3 pieces

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter – (3 pieces)

1986-2012 Kawasaki Ninja 250 EX250 250R Oil Filter – (3 pieces) - Designed for ultimate flow with less pressure drop while trap harmful contaminants. Volar motorsport oil filter. Features a synthetic filter media. Quantity 3 fitment 1986-2012 kawasaki ex250r ninja.

 

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 Matte Green

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 Matte Green

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 Matte Green - We ship within 2 days with tracking code the lead time is built in due to delays in usps sorting facility ( for us ) shipment usually takes between 15-25 working days to arrive. 20 sticker stripes that cover both sides of both rims. Waterproof, high quality vinyls custom made for your motorcycle. Durable high quality waterproof 3m and oracal material only. 24 color choices.

 

2008-2012 Kawasaki Ninja 250 EX250 Left Front Turn Signal 23037-0115 Genuine OEM Indicator Blinker Light

2008-2012 Kawasaki Ninja 250 EX250 Left Front Turn Signal 23037-0115 Genuine OEM Indicator Blinker Light

2008-2012 Kawasaki Ninja 250 EX250 Left Front Turn Signal 23037-0115 Genuine OEM Indicator Blinker Light - Original stock part requires no modification. Original replacement part 4. High quality kawasaki factory part 2. 100% satisfaction guaranteed 2008-2012 kawasaki ninja 250r left front turn signal. Oem part number 23037-0115 easy to install. Genuine oem kawasaki left front turn signal 1. Easy installation 3. Direct bolt on easy installation, no modification required condition brand new in original kawasaki factory packaging quantity 1 install oem original replacement this part comes direct from the kawasaki factory.

 

FXCNC Racing Style Motorcycle Fuel Tank Cap Gas Cap Cover Lock Keys For Kawasaki Ninja 250250R 1988-2007 Ninja EX250GPZ250GPX250 1988-2007 ZX600 ZZR600 ZX-6E 1993-2001 ZG1000 Concours 1986-2006

FXCNC Racing Style Motorcycle Fuel Tank Cap Gas Cap Cover Lock Keys For Kawasaki Ninja 250/250R 1988-2007 Ninja EX250/GPZ250/GPX250 1988-2007 ZX600 ZZR600 ZX-6E 1993-2001 ZG1000 Concours 1986-2006

FXCNC Racing Style Motorcycle Fuel Tank Cap Gas Cap Cover Lock Keys For Kawasaki Ninja 250/250R 1988-2007 Ninja EX250/GPZ250/GPX250 1988-2007 ZX600 ZZR600 ZX-6E 1993-2001 ZG1000 Concours 1986-2006 - Package 1 set ( gas cap lock1 & keys2 ). Fitment kawasaki ninja 250/250r 1988-2007 ninja ex250/gpz250/gpx250 1988-2007 photos for llustration purpose only, please double check your bike’s year and make model before the purchase if you have questions about the products, please contact us thank you. Color same as the picture the show, we will send out the item as the title say. Material t6061-t6 aluminum, high quality aluminum material+abs. No installation instruction if you need any help, please inquiry for the professional mechanic.

 

i5 Carbon Swingarm Spools Sliders for Kawasaki Ninja 250 300 ZX6 ZX6R ZX9R ZX10 ZX10R ZX12R ZX14 ZX14R

i5 Carbon Swingarm Spools Sliders for Kawasaki Ninja 250 300 ZX6 ZX6R ZX9R ZX10 ZX10R ZX12R ZX14 ZX14R

i5 Carbon Swingarm Spools Sliders for Kawasaki Ninja 250 300 ZX6 ZX6R ZX9R ZX10 ZX10R ZX12R ZX14 ZX14R - High quality billet aluminum with carbon finish. Brand new pair of carbon swingarm sliders. During checkout your quantity will show as 1, this represents one pair. These swingarm sliders provide maximum protection for many critical components in the event of an impact, they also serve as race-stand spools. To fit kawasaki ninja 250 2008-2012, ninja 300 2013-2016, zzr600 2005-2008, zx6r 1998-2012, zx6rr 2003-2006, 650r 2006-2012, z750 2005-2010, zx9r 1998-2003, z1000 2003-2010, zx10r 2004-2010, zrx1100/1200 1999-2005, zx12r 2000-2005, zx14r 2006-2016.

 

Billet 78Inch Handlebar Grips Fit Kawasaki Ninja 250 500 600 636 Zx Chrome

Billet 7/8”Inch Handlebar Grips Fit Kawasaki Ninja 250 500 600 636 Zx Chrome

Billet 7/8”Inch Handlebar Grips Fit Kawasaki Ninja 250 500 600 636 Zx Chrome - Left grip hole size 7/8″ (length 49″ ) ,. The listing is for one pair of 7/8″ billet handlebar grips. High quality billet handlebar grips. Not include internal throttle ,buyer needs to reuse their throttle sleeves ,,,,,,. Right grip hole size 1″ (length 49″).

 

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 SL Matte Gold

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 SL Matte Gold

Thick Outer Rim Liner Stripe for Kawasaki Ninja 250 SL Matte Gold - 20 sticker stripes that cover both sides of both rims. We ship within 2 days with tracking code the lead time is built in due to delays in usps sorting facility ( for us ) shipment usually takes between 15-25 working days to arrive. Waterproof, high quality vinyls custom made for your motorcycle. 24 color choices. Durable high quality waterproof 3m and oracal material only.

 

2008-2012 Kawasaki Ninja 250 EX250 Right Front Turn Signal 23037-0116 Original OEM Indicator Blinker Light

2008-2012 Kawasaki Ninja 250 EX250 Right Front Turn Signal 23037-0116 Original OEM Indicator Blinker Light

2008-2012 Kawasaki Ninja 250 EX250 Right Front Turn Signal 23037-0116 Original OEM Indicator Blinker Light - Direct bolt on easy installation, no modification required condition brand new in original kawasaki factory packaging quantity 1 install oem original replacement this part comes direct from the kawasaki factory. Genuine oem kawasaki right front turn signal 1. High quality kawasaki factory part 2. Original stock part requires no modification. 100% satisfaction guaranteed 2008-2012 kawasaki ninja 250r right front turn signal. Oem part number 23037-0116 easy to install. Original replacement part 4. Easy installation 3.

 

2011-2012 Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM  13242-0065 EX250 Foot Lever

2011-2012 Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM # 13242-0065 EX250 Foot Lever

2011-2012 Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM # 13242-0065 EX250 Foot Lever - Fits2008 ninja 250r2008 ninja 250r2009 ninja 250r2009 ninja 250r2009 ninja 250r2009 ninja 250r2010 ninja 250r2010 ninja 250r2010 ninja 250r2010 ninja 250r2011 ninja 250r2011 ninja 250r2011 ninja 250r2011 ninja 250r2012 ninja 250r2012 ninja 250r2012 ninja 250r2012 ninja 250r.

 

Smoke Lens Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 ZX 6R 10R 12R ZX-14 ZX-RR ZX600

Smoke Lens Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 ZX 6R 10R 12R ZX-14 ZX-RR ZX600

Smoke Lens Motorcycle Amber LED Turn Signal Light Blinker Indicator Side Marker Integrated Carbon Fiber Look Racing Rearview Mirror for Kawasaki Ninja 250 500 ZX 6R 10R 12R ZX-14 ZX-RR ZX600 - Please have professionals to install the items to avoid trouble which very often caused by inexperienced installer. Specifications • condition brand new • package included set of two side mirrors built with turn signal (left and right) • material high quality abs plastic mirror housing • color carbon fiber style • mirror size l 5″ x w 3 1/4″ (12. T. Approved. 5cm) • wire connection system 2 wires per light (one positive & one negative) features • brand new integrated led turn signals mirrors. O. For off road use only. Kindly reminder please note that all of our packages are shipped from hong kong, and it normally takes 7-20 business days to receive. 7 cm x 8. 2 cm) • total length 11″ (28cm) • led color amber • lens color smoke • cable length 17 15/16″ (45cm) • wattage 2. • Ride your bike with style. Fitment • fits most motorcycle, sport racing bike models with fairing (need modification for angle adjustment) please read all description and fitment before ordering the product. • Sleek and stylish design • comes necessary hardwares for installation. 59lb (720g) • thread diameter 6mm • thread length 9/16″ (1. • Made of top-rating abs housing with carbon fiber pattern finished surface. • High quality lens provide maximum visibility & safety. Not d. 2w x2 • voltage 12v • weight 1. • Adjustable mounting position.

 

Motorcycle Swingarm Spools For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon new

Motorcycle Swingarm Spools For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon new

Motorcycle Swingarm Spools For Kawasaki Ninja 250 Zzr600 650R Z1000 Zrx1200 Zx12R Carbon new - They can also be used with a lift stand to lift the rear wheel off of the ground for changing your tire or oiling your chain. Motorcycle these swingarm spools are designed to protect your swingarm & axle nut in the event of a crash new. Color the same with pictures show. Thread 10mm. Instructions no instruction,material high quality billet aluminum,,,,,,,,,.

 

2008-2012 Genuine Kawasaki Ninja 250 250R Left Stay Step OEM  35063-0385-18R Foot Holder EX250

2008-2012 Genuine Kawasaki Ninja 250 250R Left Stay Step OEM # 35063-0385-18R Foot Holder EX250

2008-2012 Genuine Kawasaki Ninja 250 250R Left Stay Step OEM # 35063-0385-18R Foot Holder EX250 - This is a used part that has been cleaned, tested and inspected to ensure quality we guarantee this part to be good. Material anodized billet aluminum. Condition 100% brand new aftermarket product. Adjustable cnc aluminum kickstand.

 

1987-2007 Kawasaki Ninja 250 EX250 EX250J EX250R Carburetor Carb Stage 1-7 Jet Kit

1987-2007 Kawasaki Ninja 250 EX250 EX250J EX250R Carburetor Carb Stage 1-7 Jet Kit

1987-2007 Kawasaki Ninja 250 EX250 EX250J EX250R Carburetor Carb Stage 1-7 Jet Kit - The kit comes with complete instructions for installation it is easy, and we offer full support, instructions, and a complete carb schematic only basic hand tools are required. Increased performance at all rpm’s, faster throttle response, & stops lean exhaust popping that damages engines. Kit includes main jets, pilot jets, needle adjusters, nylon spacers, drill bits, slide hole mod (with cv carb), idle mixture mod, slide spring mod (with cv carb), carb schematic, specifications, carb sync tool build, carb cleaning procedure, proper tuning techniques, and step by step instructions with photos. Each jet kit is custom made to your specifications for optimum performance, when you order, please email us first through amazon with your exact year, model, modifications made, & elevation, so we can design, build, & ship your kit.

 

2008-2012 Genuine Kawasaki Ninja 250 250R Right Stay Step OEM  35063-0386-18R Foot Holder EX250 Footrests

2008-2012 Genuine Kawasaki Ninja 250 250R Right Stay Step OEM # 35063-0386-18R Foot Holder EX250 Footrests

2008-2012 Genuine Kawasaki Ninja 250 250R Right Stay Step OEM # 35063-0386-18R Foot Holder EX250 Footrests - The pad is designed to fit frames and gas tanks and the rider can grip their bike with ease and with less energy. Effectively increase the contact area so that prevent sliding. This pad is very grippy and well constructed. This is a used part that has been cleaned, tested and inspected to ensure quality we guarantee this part to be good. Material made from elastomer rubber with a super strong 3m adhesive.

 

Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM  13242-0050 EX250 2008-2012 Foot Lever

Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM # 13242-0050 EX250 2008-2012 Foot Lever

Genuine Kawasaki Ninja 250 250R Gear Shift Pedal OEM # 13242-0050 EX250 2008-2012 Foot Lever - Condition brand new. Genuine kawasaki oem part. Oem fit, original turn signal. Direct from kawasaki factory. Direct bolt on easy installation, no modification required.

 

NGK Iridium Sparkplug CR8EIX for Kawasaki Ninja 250 EX250F 2008-2012

NGK Iridium Sparkplug CR8EIX for Kawasaki Ninja 250 EX250F 2008-2012

NGK Iridium Sparkplug CR8EIX for Kawasaki Ninja 250 EX250F 2008-2012 - Platinum disc welded to backside of ground electrode provides long life. Faster starts and quicker acceleration. Trivalent metal plating for superior anti-corrosion and anti-seizing. Laser welded iridium center electrode tip. Better fuel economy and lower emissions.

 

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 N

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 N

No Cut Frame Slider For 2008 2009 2010 2011 2012 Kawasaki Ninja 250 250R Ex250 N - Frame sliders help to protect the frame, engine cases and bodywork/fairings to minimize the cost of repair. Instructions no instruction guide. 2008-2012 kawasaki ninja 250 / 250r / ex250. Quantity 1 pair.

 

Red LED Brake Taillight Turn Signals for KAWASAKI NINJA 250 300R EX300 2013-2015

Red LED Brake Taillight Turn Signals for KAWASAKI NINJA 250 300R EX300 2013-2015

Red LED Brake Taillight Turn Signals for KAWASAKI NINJA 250 300R EX300 2013-2015 - Materialhigh quality abs condition100% new brandlight color red for taillight fitmentkawasaki ninja 250/300 ex300 2013-2015 please ensure this part fits for your motorcycle before ordering quantity 1high class quality and very durableintegrated taillight and turn signals in one unitenhance the look with these led tail light with turn signals easy installation,no modification required.