Top 48 Best Tail Tidies

 

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 - 2017 BLACK 2TS

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK 2T/S

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK 2T/S - Unlike other brackets mine comes with the mounting studs already press fitted on so it’s easier to install. The plate light has 3 leds and has to be hard wired on as well as the 2 turn signals. Made from thick stainless steel one piece construction so it won’t break or rust like all these other high dollar one’s. This kit will allow you to use your stock turn signals and aftermarket turn signals. I am the only one who has this design. It gives you guys the option to use either one. Please note you should always use loctite when re installing any after market parts. So i am all ears. Direct fitting bracket only fender eliminator / tail tidy and the plate light and 2 turn signals shown in the picture. If you have any issue, please give me a chance to fix it before posting negative reviews. I have great customer service and strive to make each customer/fellow biker a repeat customer as well as all of your friends. To use your stock one’s all you do is remove the tab and then your stock turn signals will fit right in. “Lifetime warranty on all my parts “. And that’s why i have a lifetime warranty on all my stuff including the lights if you buy my lights. Fits years 2014, 2015, 2016 and 2017. But more importantly i am always looking for input on how to make it better.

 

R&G Tail Tidy Fender Eliminator Kit For Honda CBR500R 13-15 CB500F 13-15 CB500X 13-17

R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR500R ’13-’15, CB500F ’13-’15 & CB500X ’13-’17

R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR500R ’13-’15, CB500F ’13-’15 & CB500X ’13-’17 - Designed using the latest 3d scanning technology for an exact fit. Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the honda cbr500r, cb500f and cb500x (’13- onwards). Supplied with a “plug & play” connector for installing the e-marked licence plate light (included). Made from an abs plastic injection moulded tail unit and light surround with an aluminium plate (powder coated black for durability and a high quality finish) to support the number plate. The installation of this tail tidy requires modification to the subframe, however the structural integrity of the subframe is not affected (see photo7 in gallery, which highlights the area that required modification). Compatible the oem or r&g micro indicators (rg370/rg371).

 

Evotech Performance Triumph Street Triple 675 765 SRRSRX660 Fender EliminatorTail Tidy 2013 to 2018 Bun001158

Evotech Performance Triumph Street Triple 675 & 765 S/R/RS/RX/660 Fender Eliminator/Tail Tidy (2013 to 2018) Bun001158

Evotech Performance Triumph Street Triple 675 & 765 S/R/RS/RX/660 Fender Eliminator/Tail Tidy (2013 to 2018) Bun001158 - Finished in durable satin black powder coating to give a factory finish combined with long term durability. Easy to follow step by step online instructions to aid hassle free installation. Evotech performance has designed the unit to incorporate the stock signal lights. Evotech performance eliminators are cnc machined from quality lightweight aluminum.

 

2013 - 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender eliminator Tail Tidy BLACK 2TS

2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender eliminator Tail Tidy BLACK 2T/S

2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender eliminator Tail Tidy BLACK 2T/S - Also the 2 turn signals shown in the picture come with this kit too. Fits 2013, 2014, 2015 and 2016. I have great customer service and strive to make each customer/fellow biker a repeat buyer. Everything shipped in the us takes roughly 1-4 business days. 120 thick stainless steel so it won’t break like all these other high dollar one’s. If you have any issue please give me a chance to fix it before posting negative feedback. Please note you should always use loctite when re-installing any after market parts. Shipping, unlike other sellers i ship everything with a low value and as a gift so you don’t have to pay a lot of taxes if your country charges them. And that’s why i have a lifetime warranty on all my stuff including the lights. The plate light is in the middle of the bracket in the picture. Direct fitting. This kit comes with everything shown in picture fender eliminator and a license plate light (to keep you legal). “Lifetime warranty”. Everything is shipped via usps. If you want the kit that has 4 turn signals so the front match that one is on my other listing. Internationally we ship to almost every country and timing can vary from 1 to 5 weeks depending on your countries customs which we have no control over. Made from.

 

R&G Tail Tidy Fender Eliminator Kit For Honda CBR650F 14-15

R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR650F ’14-’15

R&G “Tail Tidy” Fender Eliminator Kit For Honda CBR650F ’14-’15 - Compatible the oem or r&g micro indicators -rg370 (bulb), rg371 (led)or rg372 (aero style). Tidy up your bike’s rear end with this r&g tail tidy/licence plate holder for the honda cbr650f / cb650f ’14-. Made from aluminium (powder coated black for durability and a high quality finish) to support the number plate. Designed using the latest 3d scanning technology for an exact fit. Supplied with e-marked licence plate light.

 

R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan S 15-18

R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan S ’15-’18

R&G Tail Tidy Fender Eliminator For Kawasaki Vulcan S ’15-’18 - The r&g “tail tidy” license plate holder cleans up the look of your vulcan s by replacing the unsightly plastic rear fender and oem taillight with a much sleeker unit. Reinstall your original turn signals or opt for more compact r&g incandescent micro indicators, r&g led micro indicators or the r&g aero led indicators for an even cleaner look. A clear lens led taillight is compact and ultra bright while the powder coated black frame is just big enough to hang your credentials without detracting from the look of your rig. Simple plug & play connectors make for an easy installation with no wires to cut.

 

FZ 09 Fender Eliminator Tail Tidy Kit License Plate For YAMAHA FZ-09 2014 2015 2016

FZ 09 Fender Eliminator Tail Tidy Kit License Plate For YAMAHA FZ-09 2014 2015 2016

FZ 09 Fender Eliminator Tail Tidy Kit License Plate For YAMAHA FZ-09 2014 2015 2016 - Please note maybe the holes to attach your license plate cannot fit perfectly, you need to drill additional holes. For yamaha fz-09 2014 2015 2016. Material billet aluminum. Three months warranty. Direct bolt-on replacement no install instructions.

 

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2TS 2017 2018 2019

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2T/S 2017 2018 2019

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2T/S 2017 2018 2019 - Fits 2017 2018 and 2019. Easy to follow step by step online instructions to aid hassle free installation. The original signal lamps are re-used and all fixings are included in the kit. Evotech eliminators are cnc machined from aircraft grade quality lightweight aluminum. Finished in durable satin black powder coating to give a factory finish with long term durability.

 

KEMIMOTO Z900 License Plate Holder Tail Tidy Fender Eliminator for Kawasaki Z900 2017 Green

KEMIMOTO Z900 License Plate Holder Tail Tidy Fender Eliminator for Kawasaki Z900 2017 (Green)

KEMIMOTO Z900 License Plate Holder Tail Tidy Fender Eliminator for Kawasaki Z900 2017 (Green) - Material high quality t6061 aluminum alloy. Easy install without installation instructions. For kawasaki z900 2017. Need to manually connect the cables. Condition 100% brand new.

 

Evotech Performance Ducati Panigale Fender EliminatorTail Tidy All models 2012 to 2018 Bun001174

Evotech Performance Ducati Panigale Fender Eliminator/Tail Tidy (All models) (2012 to 2018) Bun001174

Evotech Performance Ducati Panigale Fender Eliminator/Tail Tidy (All models) (2012 to 2018) Bun001174 - Evotech performance eliminators are cnc machined from quality lightweight aluminum. Easy to follow step by step online instructions to aid hassle free installation. Finished in durable satin finish powder coating to give a factory finish combined with long term durability. The rear light is undisturbed and the rear signal lamps are re-positioned so fitting the eliminator is simple. You won’t have to modify your bike in any way and all fixings, and a discreet led rear license plate light is included in the kit.

 

Husqvarna 701 SUPERMOTO FENDER ELIMINATOR TAIL TIDY INTEGRATED LED TAIL LIGHT SMOKED

Husqvarna 701 SUPERMOTO FENDER ELIMINATOR TAIL TIDY INTEGRATED LED TAIL LIGHT (SMOKED)

Husqvarna 701 SUPERMOTO FENDER ELIMINATOR TAIL TIDY INTEGRATED LED TAIL LIGHT (SMOKED) - 2016-2017 husqvarna supermoto / enduro 701 fender eliminator kit flush mounted led integrated light bar kit brake lights/running lights/turn signals w tag bracket this kit is a direct bolt on kit that replaces the entire bulky factory setup light bar has 100 super bright integrated dual color leds & is completely water proof integrated light bar has brake lights, running lights, & turn signals includes tag bracket to hold your license plate components are manufactured using a precision cnc laser we only use high strength grade 1 extruded abs plastic to ensure durability & proper fit includes instructions to guide you through the installation process all mounting hardware is included made in the u. S. Ships from merritt island, fl 16 17. A.

 

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016

Ninja 300 Fender Eliminator Kit Tail Tidy for Kawasaki Ninja 250 Ninja300 2013 2014 2015 2016 - Very important doesnt fit ninja 250r (our customer leave the review). Note do not come with a turn signal light but you could use the stock turn signals with this fender eliminator. Fit for kawasaki ninja 250 / ninja 300 2013 2014 2015 2016. Note no install instructions if the product has any problem, please feel free to contact us thank you so much. Material billet aluminum.

 

Yamaha R1 Fender Eliminator Tail Tidy NTS Black Logo 2004 - 2014

Yamaha R1 Fender Eliminator Tail Tidy NTS Black Logo 2004 – 2014

Yamaha R1 Fender Eliminator Tail Tidy NTS Black Logo 2004 – 2014 - Yes it has been designed to fit all these years. I have sold a ton of these with no problems. The installation is so simple that it does not require/include any instructions. You can do a custom fit on older bike just by drilling a couple of holes to mount it too. These are not those cheap plastic painted (tonka toy plastic from china) or the thin metal that you see elsewhere that look like mine. It replaces your oem part. Check out my other pages for many other custom parts too go with these. 12 thick stainless steel (polished to a mirror/chrome like finish) so they will never rust or flake off like chrome would in time. These fit the 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 & 2014 yamaha r1 bikes. All my heel guards, chain guards and fender eliminators are machined from. 12 thick aluminum (the powder coated and bare one’s) or. Sorry i do not carry any nor do i know the size. If you want one with turn signals check out my other items. These are designed for integrated turn signals and have no spot for your turn signals. I have all colors and even a carbon fiber look (hydro dipped to look like carbon fiber). This is a yamaha r1 fender eliminator custom made precision laser cut with your bikes logo cut into them. “No one else does” this is the perfect way to dress up your r1 for the show. Installationif you do not have your existing hardware (which is what you use) you will have to go to a local bike shop to get it. I make everything i sell so i offer a lifetime warranty for as long as you own your bike. They are design by me with a unique cut-out design. It looks the same but it has a spot for turn signals. They will bolt right up in the existing spot as your stock ones. I know they are different but i designed mine to fit accordingly.

 

KAWASAKI NINJA Z EX ABS 650 Z650 900 Z900 1000 Z1000 800 Z800 125 XZ125 ZX10R ZX-10R H2 ER6N ER-6N UNIVERSAL FENDER ELIMINATOR TAIL TIDY BLACK 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 4TS

KAWASAKI NINJA Z EX ABS 650 Z650 900 Z900 1000 Z1000 800 Z800 125 XZ125 ZX10R ZX-10R H2 ER6N ER-6N UNIVERSAL FENDER ELIMINATOR TAIL TIDY BLACK 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 4TS

KAWASAKI NINJA Z EX ABS 650 Z650 900 Z900 1000 Z1000 800 Z800 125 XZ125 ZX10R ZX-10R H2 ER6N ER-6N UNIVERSAL FENDER ELIMINATOR TAIL TIDY BLACK 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 4TS - I take seriously what you guys tell me to make my stuff better if i can. Its made from. This is not a direct fitting bracket which is why it’s cheaper. Everyone has their own personal like’s and dislikes. Some require no work, some require spacers or washers and some require you to have to cut your stock fender off and drill 2 holes to mount it. Look at your bike and if it unbolts then it should be an easy install. If you do not like it i will refund it. I have great customer service and strive to make each customer/fellow biker a repeat buyer. This is not a direct fitting bracket. Please note you should always use loctite when reinstalling any after market parts. The direct fitting one is on my other listing if i have one. I custom order the plate light and turn signals to have brighter leds and longer wires. You can buy stock connectors on my other listing but why do that when its easier to hardwire and saves you money. 120 thick so it won’t break like all these other high dollar one’s. Other sellers do not do this. And that’s why i have a lifetime warranty on all my stuff including the lights. All lights are hard wired in because i sale those for all bikes as well and so they do not come with stock connectors. This is a universal bracket that i sell for all bikes. It’s not worth a bad review at all. I do because these were some issues some customers have had in the past. This kit comes with everything shown in the picture fender eliminator bracket, plate light and the turn signals only. If you have any issue please give me a chance to fix it before posting negative feedback.

 

2013 - 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender Eliminator Tail Tidy TSM Black

2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender Eliminator Tail Tidy TSM Black

2013 – 2016 FZ 07 FZ-07 MT 07 MT-07 Yamaha Fender Eliminator Tail Tidy TSM Black - Actually all yamaha lights are like this. Fits years 2013, 2014, 2015 and 2016. Direct fitting bracket only. Shipping unlike other sellers i ship everything with a low value and as a gift so you don’t have to pay a lot of taxes if your country charges them. Everything shipped in the us takes roughly 1-4 business days. Fender eliminator / tail tidy if you want a kit with turn signal it is on my other listing. Everything is shipped via usps. Please note you should always use loctite when re installing any after market parts. The plate light actually mounts on the outside edge of the bracket so you do not have to drill holes to mount it. And that’s why i have a lifetime warranty on all my stuff including the lights. Internationally we ship to almost every country and timing can vary from 1 to 5 weeks depending on your countries customs which we have no control over. This is what you use to mount your stock turn signals. This kit will allow you to use your stock turn signals but you will have to remove the rubber neck piece which exposes the stud down inside. 120 thick stainless steel so it won’t break like all these other high dollar one’s. If you have any issue please give me a chance to fix it before posting negative feedback. Made from. I have great customer service and strive to make each customer/fellow biker a repeat buyer. “Lifetime warranty”.

 

R&G Tail Tidy fender eliminator Honda CBR1000RR 2012-2014  CBR1000RR SP

R&G “Tail Tidy” fender eliminator, Honda CBR1000RR 2012-2014 / CBR1000RR SP

R&G “Tail Tidy” fender eliminator, Honda CBR1000RR 2012-2014 / CBR1000RR SP - R&g is the first company in the world to launch a dedicated tail tidy for the honda cbr1000rr (’12 onwards). This product is fully compatible with either the oem indictators or our own r&g micro indictators (#rg370), available below.

 

R&G Tail Tidy fender eliminator Honda NC700SX  NC750SX  Integra

R&G “Tail Tidy” fender eliminator, Honda NC700S/X / NC750S/X / Integra

R&G “Tail Tidy” fender eliminator, Honda NC700S/X / NC750S/X / Integra - Can be fitted with oem indicators, (as pictured) or our own aftermarket micro/mini indicators (rg370), please see related products for more details. Tidy up your rear end with this r&g tail tidy/licence plate holder suitable for the honda nc700x/s/dct, the honda nc750x model and honda integra 700/750 models.

 

KEMIMOTO NC700X Fender Eliminator Kit Tail Tidy License Plate Holder Mount Bracket with LED tail light for Honda NC700X NC700S NC750S

KEMIMOTO NC700X Fender Eliminator Kit Tail Tidy License Plate Holder Mount Bracket with LED tail light for Honda NC700X NC700S NC750S

KEMIMOTO NC700X Fender Eliminator Kit Tail Tidy License Plate Holder Mount Bracket with LED tail light for Honda NC700X NC700S NC750S - Need to manually connect the cables. Material 3mm aluminum plate. Feature cnc-machined, laser cutting anodizing surface. A neat and compact solution to standard bulky number plate mountings this lightweight aluminum bracket easily mounts a standard size number plate. Include the led tail light, without installation instructions.

 

Yamaha R3 YZF-R3 2 Turn Signals LEDs with built in Daytime Running Lights for fender eliminator or tail tidy

Yamaha R3 YZF-R3 2 Turn Signals LED’s with built in Daytime Running Lights for fender eliminator or tail tidy

Yamaha R3 YZF-R3 2 Turn Signals LED’s with built in Daytime Running Lights for fender eliminator or tail tidy - Fits years 2015, 2016 and 2017. Everything is shipped via usps. “Life time warranty”. = Day time running lights. It saves you some money but my 3 wire plug and play connectors are on my other add as well. Yes when lite up the turn signals are amber. On your stock lights. Black = negative red = turn signals. If your bike has drl now then these will work. Everything shipped in the us takes roughly 1-4 business days. On the left black=negative brown= turn signals. On the right black=negative green= turn signals. You have to use washers to mount them or use your stock turn signal base that you have now. Led’s clear lenses black base turn signals with daytime running lights built in. These also have to be hard wired in. Blue= day time running lights. They have too be to be legal. Blue. But if you want too you can buy the adapters on my other add. Yellow = day time running lights. Internationally we ship to almost every country and timing can vary from 1 to 5 weeks depending on your countries customs which we have no control over. These are not the average turn signals. This is what you should have on your bike. Shipping unlike other sellers i ship everything with a low value and as a gift so you don’t have to pay a lot of taxes if your country charges them. They come with 3 wires (ordered custom to be longer) so some of the led’s light up for day time running lights.

 

2014-2018 fz07 Fender Eliminator Tail Tidy Kit License Plate Holder LED Light for yamaha FZ-07 2014 2015 2016 2017 2018

2014-2018 fz07 Fender Eliminator Tail Tidy Kit License Plate Holder LED Light for yamaha FZ-07 2014 2015 2016 2017 2018

2014-2018 fz07 Fender Eliminator Tail Tidy Kit License Plate Holder LED Light for yamaha FZ-07 2014 2015 2016 2017 2018 - Warranty 3 months. Fender eliminator with led light for yamaha fz 07 2014 2015 2016 2017 2018. Note without any installation instruction, please install by the professional if you need. Material aluminum plate. If the led light has any problem, please feel free to contact us we are willing to re-sent a new led light to you.

 

R&G Tail Tidy Licence Plate Holder for KTM 125200390 Duke fully moulded

R&G “Tail Tidy” Licence Plate Holder for KTM 125/200/390 Duke (fully moulded)

R&G “Tail Tidy” Licence Plate Holder for KTM 125/200/390 Duke (fully moulded) - Feature cnc-machined, laser cutting anodizing surface. Material 3mm aluminum plate. Clean up the look of your motorcycle. Include the led tail light, without installation instructions. A neat and compact solution to standard bulky number plate mountings this lightweight aluminum bracket easily mounts a standard size number plate.

 

R&G Tail Tidy Fender Eliminator for Yamaha FZ-09 17

R&G Tail Tidy Fender Eliminator for Yamaha FZ-09 ’17

R&G Tail Tidy Fender Eliminator for Yamaha FZ-09 ’17 - The r&g tail tidy fender eliminator will clean up the back end of your motorcycle. Replaces the large and cumbersome plate holder on the stock cantilevered mount. This handy unit is constructed out of stainless steel and is finished with a black powder coat for added protection and good looks.

 

GSXS750 GSX-S750 Suzuki Fender eliminator Tail Tidy 2015 - 2016 BLACK 2 TS

GSXS750 GSX-S750 Suzuki Fender eliminator Tail Tidy 2015 – 2016 BLACK 2 T/S

GSXS750 GSX-S750 Suzuki Fender eliminator Tail Tidy 2015 – 2016 BLACK 2 T/S - Direct fitting bracket only fender eliminator / tail tidy and plate light and 2 turn signals shown in the picture. Made from thick aluminum so it won’t break like all these other high dollar one’s. This bracket is made from thick aluminum one piece construction so it won’t break or rust and has a life time warranty on bracketand on the lights too. This kit will allow you to use your stock turn signals and aftermarket turn signals. The plate light has 3 leds and has to be hard wired on as well as the 2 turn signals. It gives you guys the option to use either one. To use your stock one’s all you do is remove the tab and then your stock turn signals will fit right in. If you want a kit with after market turn signals it is on my other listing. Please note you should always use loctite when re installing any after market parts. And that’s why i have a lifetime warranty on all my stuff including the lights if you buy my lights. If you have any issue, please give me a chance to fix it before posting negative reviews. Fits years 2015 and 2016. I am the only one who has this design. I have great customer service and strive to make each customer/fellow biker a repeat customer as well as all of your friends.

 

Yamaha FZ 07 FZ-07 MT07 MT-07 FENDER ELIMINATOR Tail Tidy 2014 2015 2016 2017

Yamaha FZ 07 FZ-07 MT07 MT-07 FENDER ELIMINATOR Tail Tidy 2014 2015 2016 2017

Yamaha FZ 07 FZ-07 MT07 MT-07 FENDER ELIMINATOR Tail Tidy 2014 2015 2016 2017 - Direct fitting, no cutting or modification to the bike needed. Very high quality and designed to look like a factory part. Made in usa 100 % satisfation gurantee and life time warranty. Gives the bike a very clean , look race bike look. Easiest to install and uses factory hardware.

 

YAMAHA FZ09 FZ-09 Fender eliminator Tail Tidy 2014 - 2016 BLACK NTS

YAMAHA FZ09 FZ-09 Fender eliminator Tail Tidy 2014 – 2016 BLACK NTS

YAMAHA FZ09 FZ-09 Fender eliminator Tail Tidy 2014 – 2016 BLACK NTS - This has no turn signal mounts. I have great customer service and strive to make each customer/fellow biker a repeat buyer. The one with turn signal mounts is on my other listing. And that’s why i have a lifetime warranty on all my stuff including the lights. If you have any issue please give me a chance to fix it before posting negative feedback. If you want a plate light is on my other page. It is designed for integrated turn signals only. “Life time warranty” on all my parts. Made from. 120 thick stainless steel so it won’t break like all these other high dollar one’s. Direct fitting bracket only. Please note you should always use loctite when re installing any after market parts. Fits years 2014, 2015 and 2016.

 

Honda Rebel CMX 300 500 Real Cowl Tail tidy integrated Light fender eliminator - Matt Black

Honda Rebel CMX 300 500 Real Cowl Tail tidy integrated Light fender eliminator – Matt Black

Honda Rebel CMX 300 500 Real Cowl Tail tidy integrated Light fender eliminator – Matt Black - Motozaaa abs tail tidy rear cowl with brake light and integrated turn signs, clean up that back end with this lighter tail, comes with mounting hardware, the rear light will need wiring in its not plug and play, fits on the honda rebel cmx 300 and 500.

 

Honda Grom MSX125 Tail Tidy Fender Eliminator V1

Honda Grom MSX125 Tail Tidy Fender Eliminator (V1)

Honda Grom MSX125 Tail Tidy Fender Eliminator (V1) - Fender eliminator tail tidy with lights to fit on the honda grom and honda msx125.

 

R&G Tail Tidy Fender Eliminator For Ducati Scrambler 800 Icon 15-18

R&G Tail Tidy Fender Eliminator For Ducati Scrambler 800 Icon ’15-’18

R&G Tail Tidy Fender Eliminator For Ducati Scrambler 800 Icon ’15-’18 - The “tail tidy” from r&g lets you toss that thing in the trash and give your bike a much cleaner and more traditional look while still remaining legal. Steel license plate bracket with led license plate light cleans up the rear of your scrambler. The problem is the big, ugly license plate bracket that attaches to the swingarm. The tail section of the ducati scambler is already clean and simple right from the factory. See installation instructions for further detail. Note installation requires moving the license plate light wires from the swingarm to the rear tail section. The bracket is made from stainless steel and is powdercoated black.

 

13-16 Ninja 300 Fender eliminator Tail Tidy Kit Rear Indicator Turn Signal Light for KAWASAKI Ninja 300 2013 2014 2015 2016

13-16 Ninja 300 Fender eliminator Tail Tidy Kit & Rear Indicator Turn Signal Light for KAWASAKI Ninja 300 2013 2014 2015 2016

13-16 Ninja 300 Fender eliminator Tail Tidy Kit & Rear Indicator Turn Signal Light for KAWASAKI Ninja 300 2013 2014 2015 2016 - Notice without any installation instructions. The fender eliminator with a led. Warranty three months. 2013 2014 2015 2016 ninja 300 fender eliminator tail with rear indicator turn signal light.

 

R&G Tail Tidy Licence Plate Holder for KTM 125200390 Duke moulded with aluminium hanger

R&G “Tail Tidy” Licence Plate Holder for KTM 125/200/390 Duke (moulded, with aluminium hanger)

R&G “Tail Tidy” Licence Plate Holder for KTM 125/200/390 Duke (moulded, with aluminium hanger) - Turn signals not included. Bracket is made of aluminium which is powder coated black. Includes license plate light. Cleans up the look of your motorcycle. Will not work on usa bikes please check your tail light to make sure it matches.

 

KTM 390 Duke Tail Tidy 2017 BUN002928

KTM 390 Duke Tail Tidy 2017+ BUN002928

KTM 390 Duke Tail Tidy 2017+ BUN002928 - Turn signals not included. Includes license plate light. The tail tidy has been designed to fit your ktm’s existing mountings and no modification to the bike’s bodywork is required. Will not work on usa bikes please check your tail light to make sure it matches. Cleans up the look of your motorcycle.

 

R&G Tail Tidy Fender Eliminator for KTM 1290 Super Duke GT 17

R&G “Tail Tidy” Fender Eliminator for KTM 1290 Super Duke GT ’17

R&G “Tail Tidy” Fender Eliminator for KTM 1290 Super Duke GT ’17 - This sleek tail tidy is powder coated black for a durable corrosion resistant finish that will continue to look great for miles. Installation is simple, with no other modifications required, simply bolt-on and go. Sturdy stainless steel construction properly supports the license plate and factory turn signals and can also accommodate upgraded micro led indicators or aero led indicators for an even slicker appearance. The r&g “tail tidy” fender eliminator for ktm 1290 super duke gt ’17 replaces the bulky factory tag holder with a lower profile, more aesthetically pleasing unit. Rgr0001 or rg. Tidy up the tail of your gt with this fender eliminator from r&g if your micro indicators end up flashing too fast or too slow, you can stop/prevent this problem by installing the r&g resistors (rg. Rgr0002).

 

R&G Tail Tidy fender eliminator for Honda CBR500R CB500F 13 CB500X 13- plastic moulded version

R&G “Tail Tidy” fender eliminator for Honda CBR500R, CB500F ’13, CB500X ’13- (plastic moulded version)

R&G “Tail Tidy” fender eliminator for Honda CBR500R, CB500F ’13, CB500X ’13- (plastic moulded version) - Supplied with a “plug & play” connector for installing the e-marked licence plate light (included). Made from the latest injection moulding procedures and technologies for a superb finish and fit. Compatible with either the oem indicators or our own micro indicators (rg370 / rg371). Tidy up your bike’s rear end with this injection moulded r&g tail tidy/licence plate holder for the honda cbr500r (’13- onwards), cb500x (’13- onwards) and cb500f (’13- onwards).

 

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 - 2017 BLACK TSM

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK TSM

YAMAHA FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK TSM - Unlike other brackets mine comes with the mounting studs already press fitted on so it’s easier to install. If you want a kit with after market turn signals it is on my other listing. If you have any issue, please give me a chance to fix it before posting negative reviews. It gives you guys the option to use either stock or aftermarket turn signals. To use your stock one’s all you do is remove the tab and then your stock turn signals will fit right in. Please note you should always use loctite when re installing any after market parts. “Lifetime warranty on all my parts “. This kit will allow you to use your stock turn signals and aftermarket turn signals. But more importantly i am always looking for input on how to make it better. So i am all ears. Made from thick stainless steel one piece construction so it won’t break or rust like all these other high dollar one’s. I have great customer service and strive to make each customer/fellow biker a repeat customer as well as all of your friends. Direct fitting bracket only fender eliminator / tail tidy. And that’s why i have a lifetime warranty on all my stuff including the lights if you buy my lights. Fits years 2014, 2015, 2016 and 2017. I am the only one who has this design.

 

Ducati Scrambler ICON Urban Enduro Tail Tidy 2015 bun001712

Ducati Scrambler ICON/ Urban Enduro Tail Tidy 2015+ bun001712

Ducati Scrambler ICON/ Urban Enduro Tail Tidy 2015+ bun001712 - No mofication to you bike is required. We have reused the rear light so no wiring is required. Cnc machined from aluminium and powder coated black for longevity. Ducati scrambler urban enduro tail tidy the ducati scrambler tail tidy is easy to fit using existing mounting points. Easy to follow pictorial instruction are available on the website.

 

YAMAHA FJ09 FJ-09 Fender eliminator Tail Tidy 2014 - 2017 BLACK NTS PL

YAMAHA FJ09 FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK NTS PL

YAMAHA FJ09 FJ-09 Fender eliminator Tail Tidy 2014 – 2017 BLACK NTS PL - Made from. This has no turn signal mounts. 120 thick aluminum so it won’t break like all these other high dollar one’s. The one with turn signal mounts is on my other listing. Please note you should always use loctite when re installing any after market parts. “Life time warranty” on all my parts. Direct fitting bracket and plate light shown in the picture. I have great customer service and strive to make each customer/fellow biker a repeat buyer. If you have any issue please give me a chance to fix it before posting negative feedback. It is designed for integrated turn signals only. Fits years 2014, 2015, 2016 and 2017. And that’s why i have a lifetime warranty on all my stuff including the lights.

 

KEMIMOTO for Kawasaki Z125  Z125 Pro License Plate Holder Tail Tidy Fender Eliminator Style 1

KEMIMOTO for Kawasaki Z125 / Z125 Pro License Plate Holder Tail Tidy Fender Eliminator (Style 1)

KEMIMOTO for Kawasaki Z125 / Z125 Pro License Plate Holder Tail Tidy Fender Eliminator (Style 1) - For z125 / z125 pro 2015 2016 2017. Material high quality t6061 aluminum alloy (3mm thinkness). Package include the same as the pictures show. The color of led license plate light cover black.

 

APRILIA RSV1000R Fender eliminator Tail Tidy 2004 - 2010 BLACK NTS

APRILIA RSV1000R Fender eliminator Tail Tidy 2004 – 2010 BLACK NTS

APRILIA RSV1000R Fender eliminator Tail Tidy 2004 – 2010 BLACK NTS - “Life time warranty” on all my parts. Fits years 2004, 2005, 2006, 2007, 2008, 2009, and 2010. 120 thick aluminum so it won’t break like all these other high dollar one’s. And that’s why i have a lifetime warranty on all my stuff including the lights. This has no turn signal mounts. Please note you should always use loctite when re installing any after market parts. If you have any issue please give me a chance to fix it before posting negative feedback. Direct fitting bracket only. Made from. If you want a plate light is on my other page. I have great customer service and strive to make each customer/fellow biker a repeat buyer.

 

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2017 2018 2019

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2017 2018 2019

KAWASAKI NINJA Z EX ABS 650 Z650 FENDER ELIMINATOR TAIL TIDY BLACK TSM 2017 2018 2019 - Fits 2017 2018 and 2019. High quality, fits and looks like a factory part. Kit includes 1 fender eliminator with break out tabs for factory or aftermarket turn signals and led plate light with connectors. Gives your bike that clean gp race bike look. Direct bolt on , no cutting or modification required simply remove and replace.

 

Evotech Performance Yamaha XSR900 Tail TidyFender Eliminator 2016 to 2018 Bun002444

Evotech Performance Yamaha XSR900 Tail Tidy/Fender Eliminator. (2016 to 2018) Bun002444

Evotech Performance Yamaha XSR900 Tail Tidy/Fender Eliminator. (2016 to 2018) Bun002444 - No modifications to the wiring are required, simply plug and play. All required fixings are supplied in the kit with easy to follow online instructions. Cnc machined from lightweight aircraft grade aluminium. You retain the original yamaha factory signal lamps and we supply a new discreet led license plate light that is more in keeping with the unique design. Finished in a durable satin black powder coating to give a factory finish with long term durability.

 

KAWASAKI NINJA EX650 650 Fender Eliminator Tail Tidy 2012 - 2016 BLACK NTS PL

KAWASAKI NINJA EX650 650 Fender Eliminator Tail Tidy 2012 – 2016 BLACK NTS PL

KAWASAKI NINJA EX650 650 Fender Eliminator Tail Tidy 2012 – 2016 BLACK NTS PL - I have great customer service and strive to make each customer/fellow biker a repeat buyer. Fits years 2012, 2013, 2014, 2015 and 2016. “Life time warranty” on all my parts. It is designed for integrated turn signals only. Made from. If you have any issue please give me a chance to fix it before posting negative feedback. This has no turn signal mounts. And that’s why i have a lifetime warranty on all my stuff including the lights. 120 thick aluminum so it won’t break like all these other high dollar one’s. The one with turn signal mounts is on my other listing. Please note you should always use loctite when re installing any after market parts. Direct fitting bracket and plate light shown in the picture.

 

CBR1000RR CBR 1000RR Honda Fender eliminator Tail Tidy 2010 - 2017 BLACK NTS

CBR1000RR CBR 1000RR Honda Fender eliminator Tail Tidy 2010 – 2017 BLACK NTS

CBR1000RR CBR 1000RR Honda Fender eliminator Tail Tidy 2010 – 2017 BLACK NTS - Evotech eliminators are cnc machined from aircraft grade quality lightweight aluminum. The original signal lamps are re-used and all fixings are included in the kit. Fits 2010 2011 2012 2013 2014 2015 2016 and 2017. Fits 2017 2018 and 2019. Easy to follow step by step online instructions to aid hassle free installation.

 

R&G Tail Tidy Fender Eliminator for Aprilia V4 Tuono 1100 15-  RSV4 RR 15-  RSV4 RF

R&G Tail Tidy Fender Eliminator for Aprilia V4 Tuono 1100 ’15- , RSV4 RR ’15- , RSV4 RF

R&G Tail Tidy Fender Eliminator for Aprilia V4 Tuono 1100 ’15- , RSV4 RR ’15- , RSV4 RF - This slick fender eliminator is 100% bolt-on and does not require any modifications to the bodywork for fitment. Replace that unsightly rear fender on your aprilia with a sveltetail tidy from r&g features sturdy stainless steel construction lightweight aluminum main bracket attractive & durable powder coated black finish sleek low profile design provides a sharp aesthetic bolt-on installation does not require modifications replaces the ugly factory plastic fender / tag holder works with original indicators or upgrade to r&g micro led or aero led indicators bright led license plate tag light included quick connect electrical connectors. The r&g tail tidy fender eliminator for select aprilia motorcycles replaces the huge factory tag holder/mud guard with a sleek low profile unit that significantly improves aesthetics. Use your stock turn signals or upgrade to micro led or aero led indicators for an even slimmer profile. Strong stainless steel and aluminum construction is powder coated black for increased durability that blends well with the original undertail.

 

2004-2014 Yamaha R1 Fender Eliminator Tail Tidy Black Kit with 2 Turn Signals Plate Light

2004-2014 Yamaha R1 Fender Eliminator Tail Tidy Black Kit with 2 Turn Signals & Plate Light

2004-2014 Yamaha R1 Fender Eliminator Tail Tidy Black Kit with 2 Turn Signals & Plate Light - This kit comes with the turn signals and plate light that you see in the pictures. Check out my other pages for many other custom parts to go with these. 12 thick aluminum (the powder coated and bare one’s) or. These are not those cheap plastic painted (tonka toy plastic from china) or the thin metal that you see elsewhere that look like mine. The installation is so simple that it does not require/include any instructions. Also all lights are hardwired in. You can do a custom fit on older bike just by drilling a couple of holes to mount it too. I sale them this way and cheaper so you guys can paint or powder coat them whatever color you want too. All my heel guards, chain guards and fender eliminators are machined from. I make everything i sell so i offer a lifetime warranty for as long as you own your bike. I have all colors and even a carbon fiber look (hydro dipped to look like carbon fiber). They have only been de burred and formed. They are designed by me with a unique cut-out design. Sorry i do not carry any nor do i know the size. It replaces your oem part. Fits 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 & 2014 yamaha r1. 12 thick stainless steel (polished to a mirror/chrome like finish) so they will never rust or flake off like chrome would in time. “No one else does” this will bolt right up in the existing spot as your stock ones. I know they are different but i designed mine to fit accordingly. I have sold a ton of these with no problems. Installation if you do not have your existing hardware (which is what you use) you will have to go to a local bike shop to get it. Yes it’s designed to fit all these years. Please note that all of my bare items (unpainted) will need something done to them. This is custom made precision laser cut with your bikes logo cut into them.

 

Yamaha FZ 09 FZ-09 MT09 MT-09 2014 2015 2016 Fender Eliminator Tail Tidy

Yamaha FZ 09 FZ-09 MT09 MT-09 2014 2015 2016 Fender Eliminator Tail Tidy

Yamaha FZ 09 FZ-09 MT09 MT-09 2014 2015 2016 Fender Eliminator Tail Tidy - Gives your bike that clean gp race bike look. Replaces the factory large ugly mud flap. Direct bolt on , no cutting or modification required simply remove and replace. Kit includes 1 fender eliminator with break out tabs for factory or aftermarket turn signals and led plate light with connectors. High quality, fits and looks like a factory part.

 

GSXS1000 GSX-S1000 Suzuki Fender eliminator Tail Tidy 2015 - 2017 BLACK 4 TS

GSXS1000 GSX-S1000 Suzuki Fender eliminator Tail Tidy 2015 – 2017 BLACK 4 T/S

GSXS1000 GSX-S1000 Suzuki Fender eliminator Tail Tidy 2015 – 2017 BLACK 4 T/S - Made from thick aluminum so it won’t break like all these other high dollar one’s. Fits years 2015, 2016 and 2017. If you have any issue, please give me a chance to fix it before posting negative reviews. This bracket is made from thick aluminum one piece construction so it won’t break or rust and has a life time warranty on bracketand on the lights too. It gives you guys the option to use either one. Please note you should always use loctite when re installing any after market parts. Direct fitting bracket only fender eliminator / tail tidy and plate light and 4 turn signals shown in the picture so the front match the back. The plate light has 3 leds and has to be hard wired on as well as the 4 turn signals. To use your stock one’s all you do is remove the tab and then your stock turn signals will fit right in. I have great customer service and strive to make each customer/fellow biker a repeat customer as well as all of your friends. This kit will allow you to use your stock turn signals and aftermarket turn signals. I am the only one who has this design. If you want a kit with after market turn signals it is on my other listing. And that’s why i have a lifetime warranty on all my stuff including the lights if you buy my lights.

 

YAMAHA R1 Fender eliminator Tail Tidy 2014 - 2017 BLACK TSM

YAMAHA R1 Fender eliminator Tail Tidy 2014 – 2017 BLACK TSM

YAMAHA R1 Fender eliminator Tail Tidy 2014 – 2017 BLACK TSM - A neat and compact solution to standard bulky number plate mountings this lightweight aluminum bracket easily mounts a standard size number plate. Clean up the look of your motorcycle. Material 3mm aluminum plate. Fits 2014 2015 2016 and 2017. Include the led tail light, without installation instructions.

 

Evotech Performance KTM 690 Duke 2012 - Onwards Tail Tidy bun000922

Evotech Performance KTM 690 Duke 2012 – Onwards Tail Tidy bun000922

Evotech Performance KTM 690 Duke 2012 – Onwards Tail Tidy bun000922 - We are proud of our products and are so confident in our quality and value that we operate a ‘no-quibble’ returns policy if you are not completely satisfied. If you require a clear rear light please contact us. Technical specifications material, billet aluminium finish, black powder coating fitting difficulty, 1 ( 1-easy 5-hard ) fitting time, 20 mins weight, 500g weight saving, 500g. We also supply a new rear light which is 100% road legal with a clear or red option, plus the original indicators are reused. Cnc machined from lightweight aircraft grade aluminium and finished in tough satin black powder coat. All fixings and instructions are included in the kit. Ktm 690 duke tail tidy look at the sleek and strong design of this evotech ktm 690 duke tail tidy and how it blends seamlessly with the sporting lines of your ktm 690. This is a real eye catcher, it’s how your bike was meant to look. This tail tidy has been designed to fit your ktm 690’s existing mountings and no modification to the bike’s bodywork is required.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.